Wayward Shrimp

Cool Thanks.

Thank you all so much for your replies! The knowledge and experience you share is invaluable. I had a pretty awesome reply, that addressed most replies personally, and of course, thats when my computer chose to crash. I'll do my best to cover what I said but man am i aggravated > Taking all into account I will be moving forward with a belted design of some sort. I guess I was all little vague (or maybe bratty?) in the original post. I have no qualms with belts, just currently don't have the habit (or possession of one) wearing them. Seeing the clips it seamed to make scene that loops=belt clip=no belt. But I'm not going to argue with years of experience and very very sound logic. Belts are my future As it is I am indeed small (5'1" and while I'm not heavy but I'm no twig...) so finding properly fitting clothes is sometimes a challenge, awkward new lump or no... But finally I have no reservations about making adjustments, and hopefully it won't be to much of a nightmare... To me, on-body is the only option. I want it in easy reach, held securely and no chance of leaving it in a bag somewhere. As far as pocket carry, even my men's jeans hardly have room for my wallet. Which, is there because I only wear a purse when I have no pockets (and I'll wear a jacket with pockets first...) So i luck out that in the purse is not top of the list of best ways to carry CDMatherne, I really like what you have done with that holster idea. Especially the multi function (OWB ad IWB). Again thank you all so much for your input and opinions. Perhaps, since I missed the whole shoe thing most women get into, I'll have a holster for every occasion... j/k Soooo, in summary I will likely be moving forward with something on a nice belt, with leather loops. Likely also rough out. this made me laugh so hard! Unfortunately, I can make a relatively small shirt look like a dress. Which i guess is good for concealing things... not so good for avoiding being confused with a little kid... lol

well bummer. I guess it might be time to visit the 'how to make a belt' forum too Thanks for the replies!

There are some really good tutorials on here, but I have some situation specific questions. First are there any guides/threads that I could look thru? (IWB holster keywork ended up being a wild goose chase) I want to make a IWB holster for a Ruger LCR. Thing is I don't wear a belt, and if I do, its a thin one, not something anything could really clip or use as support. How do I select the spring clip? (Size, and shape) Any specific considerations for this type of holster/carry situation. Thanks in advance!

Thanks! Okay. I'll let it set for a few days then. I got it half in order... hadnt' sewn it yet, but had cut and put the holes in. Is it possible to use the eco-flo dyes AFTER oiling? Would that be a matter of let it set for a few days or will it conflict?

I have some thin (2-3) oz veg tan leather that I have been trying to use up, but its very uncooperative. To start it feels very dry and has the tendency to want to curl and looks generally unappealing. It is hard to case (gets sopping wet and then dries right out) so I don't bother tooling it just swivel knife cuts. I decided to use it to make little notebook covers. In an effort to give it a nicer texture and lightly darken I oiled one of the covers (with I admit not too much) neats foot. It is fine over the general surface, however it seeped around the stitching holes and swivel knife cuts leaving a dark greasy bleed under effect. Is there a way that I can pull some of the oil out? Or some other way to reduce the 'greasy'ness of it? Mostly I worry about transfer of oils to the papers.

Currently I have P972 F902... mostly I've been doing small stuff, but need something bigger. I can't tell from the Tandy/Springfield sites what the sizes of the impression are.... Any suggestions for good tools to pick up? Or at least an idea of the comparative sizes? The leaves are about 3"-4" across.

I just use a 1/4 dowel rod. With a sponge or brush I tend to slip but not the rod. Hurrah surface tension :D

I like that seeder technique! Thats a lot of tiny scales, but it looks great

For big scales i've used D434 tho its a bit more stylized For small scales I use C770 A tight patern And a looser lighter impression. I like any of the tools with two cresents.

Wow, thank you for that info! I've no intent to lead anyone astray! D: I'm not looking so much to save time, but space. I don't have much room for my supplies/chemicals/tools and any clutter I can reduce is good. One day I hope to have a shop or something, but now I just have a old entertainment center.

I do a lot of celtic/viking style knots and nothing annoys me more than slipping on the last bit of two parallel lines. Is the spacing on a double edged swivel blade a possible option to help? The trick is the long stretches... I've not seen many samples of the results or how wide the spacing is. I suspect its too narrow... i've used ceramic blades before, but only a little. i dont know much about care and maintenance. curently i just use standard tandy blades and handles. any experiences? Or some other idea? or just practice makes perfect?

I made sure to check the ingredients for 'ferrous sulfate" or "iron sulfate" some said "in the form of" other was just in the ingredients. And like i mentioned you can get a huge (to me) bag at the garden center of a hardware store that doesn't have to be crushed or have the other stuff tablets do. I mostly do small projects so I figured tablets and small batches is fine for me.

I was out today to get some steel wool and vinegar to start my batch over (Its bubbling away in the closet now) and looked about for Iron Sulfate. They had a large bag in the gardening section of the hardware store. Maybe I'll go this route next time, but in case it didn't work I didn't want to be stuck with a big bag of it, I got Iron tablets from the grocery store. Anyway, I crushed up 2-3 tablets and mixed it with hot water, and dipped some scraps into the solution. It seams to have worked! I'm not sure if the color is on par with the classic Vinegaroon recipe, but it sure was faster to make. The oval piece was the one I tried to treat with my stainless steel batch... I suspect thats why the color is worse, the scraps are the peices cut out from around it. I am not sure how long this lasts, or how large a project it will treat.