ARamcharan

Thanks for that, I should have thought of that, considering how many wet formed hunting knife sheaths I have made for friends and family.

TZHunter; I considered that and I might just go that way, I have been studying the gloves I already have and have had a few ideas on how to clone them to suit my needs. I'll also be using 8-10 oz veg tanned for the palm, fingers, and wrist guard of the gloves and some 2-4 oz upholstery leather for the back side and wrist strap, double stitched all around except the fingers. BIGGUNDOCTOR; There are plenty of gloves I could get off the shelf, but because I just started this job and don't get paid for another two weeks and have plenty of leather to use I just thought this would be cheaper. I've also been wanting to make riding gloves for my motorcycle, so this would be good practice.

Hey all, been a while since I was on last. Things have been going well overall, but I could use some more help. I recently started a new job in natural gas fields, but the gloves my company provides are horrible cotton ones. I've been looking for a pattern for some good gloves to make that can stand up to oil and constant use, but haven't been able to find any. These are going to be my first gloves, and just talking about them with my co-workers, there seems to be interest and possible sales if they turn out well. If anyone knows where I can find a good pattern for strong work gloves, I would greatly appreciate it. Thanks

In that case, I have a few pointers I picked up on where I need to improve mine: 1) Don't have a large space between tools, like on the right side of mine between the pen and my last stamp, it bunches up when rolled. 2) Use something other than snaps. They don't look the best on here, and the ones I have are hard to snap and unsnap when rolled because of the lack of support behind them. 3) Stitch, sew, or lace the whole thing. It looks A LOT nicer than sewing part, lacing part, and stitching part. 4) Make sure you properly mold the leather to your tools. Mine is kind of loose. That might be partly because I used chrome tanned upholstery leather. 5) 8-9 oz veg tanned is too thick for the "cover" I put on it, but it was all I had, and 6) put something over the top to keep the tools from falling out. Other than that, GOOD LUCK!

These are pictures of the completed tool roll. I need to add something to the top to keep them from falling out though Thanks to everyone who helped and suggested ideas!

Ok, those are new! Last time I checked they only had the Al Stohlman catalog covers like the eagle, a bit too advanced for my level so far. I bookmarked the site it takes you to now though! I ended up doing a basic floral design already.

Almost done! I stitched the rest with artificial sinew rather than sewing it, I like how it turned out. Going to stamp the border on the "cover" in about half an hour, take pictures, and post them! On a side note, does anyone know where I can find some simple carving templates? I'm using some of the scrap veg-tanned to practice with my swivel knife, maybe add it to the cover before stitching it on...

Thanks for the offer, but since I already have the majority of it laced with the black suede already (and coincidentally lost my last lacing needle to top it off), I'm just going to finish it with thread and a needle. I also do have an entire pack of plastic lace, but it looks cheap so I don't want to use it.

I'm just going to finish it with the black suede I have, it gives a nice contrast to the light tan body of it. It looks fine on the outside, but it's just a little thick for the holes and is a little rough. But good ol' Mr. Murphy had to step in and make me "misplace" my last lacing needle after I finished most of the upper section, so the holder strap on the bottom will be sewn, along with the "cover" I'm putting on the outside of it out of veg-tanned. I actually might be calling you soon for some advice on a project I just had the idea for as I was about to fall asleep for a Pool Cue holder, it will be my first one, but I have some definite ideas of what I want to do for it. Thanks for the offer though!

Ok, my package from Tandy didn't get here today, so I'll have to put the border on tomorrow. And all I had for scrap lace is suede, not too big a fan of it, but I didn't feel like stitching the entire thing and I'm not that good at buckstitching, so the ends the ends aren't the prettiest. Other than that, it's coming along better than I expected it to.

Just a heads up, it was a spur of the moment project that is just a temporary measure, so it's not the cleanest thing I have ever made

I was thinking the latter too. I might measure how wide the total roll would be and attach it to the outside so it would be like a covering.

Thanks, I'll check e-bay. I Googled it but couldn't find anything. It is for only one project for now, but I do live in a rural area so it might be worth it to invest in a custom one. The main problem I have with ordering a custom stamp is I already quoted my customer a price range and that would add a lot to it. Thanks for the help though, I'll see what I can find in those sources.

I was thinking about replacing the front and back sides entirely with veg tanned and sewing them to the sides. I would then divide them into quarters with a small line to show off different stamping and dying patterns. I've found some local tanneries that I could just drive to rather than pay for the shipping. I'd have to spend the money on gas but can write it off come tax time as a business trip. Thats a good idea for the strip around the edge of my roll, I'll have to try that. My leather just dried from forming it around the tools, so I can finish it tonight. I'll try to get some pictures up when it is done. I was wrong though, it only holds about 10 stamps and a pen rather than the 20. I forgot to take into account the extra space I need for the snap.

I'm looking for a small tractor stamp to go on a belt. If anyone has any ideas of where I could find one or willing to part with one, please let me know. Thanks!