Bruce Evans

The thread I got from Ellie is #277 nylon..Thanks for the compliment Silverbullet,i hope to use and enjoy her for a long time.

oh yea,awesome stitching on the harness,hope i can get mine to sew close to that for my knife sheaths.

Thanks,lots to check...I have #200 needles as for the size thread I will have to check tomorrow,I got the thread at the same time I got the shuttle and bobbin and new foot from Elli,in fact he spun the bobbin and set it in the shuttle for me.I think allot of my problem stems from the fact the machine was locked up when I rescued it,and I didnt know what I was messing with and proceeded to take all the parts off and cleaned and painted them,so nothing got put back in the same place it was as for adjustments and I am trying to go by the book on how to set it up but I dont understand some of the terminology....please be patient with me,i am learning....Thanks to you and Mr.Cox for all the help...I will check on the things you suggested.

Here is a picture of top and bottom of what I am getting for my stitching,please somebody,what knobs do I need to adjust to correct the stitch..

Thanks for the help on the winder..Today I made a new thread holder and tray to hold needles and bobbins and other things.

thanks Mr,Cox

this is what i need

Oh yea another problem,How do I wind a bobbin with out that atachment they had with this machine?????

Getting closer,got it to pick up the thread,now just to correct it skipping stitches..had all kinds of things out of adjustment,just had to start going through the book and adjust 1 thing at a time,but hey I have never got it to do this much,so I guess I am winning...took a break and went back to look at it and found a problem with he way I have the spool set up,will fix that tomorrow..Also noticed that I had forgot to tighten the 2 adjuster screws on the wishbone shaped arm on the back,may have something to do with things not adjusting correctly.

wont show video,dang

got everything except the wax pot rebuilt,painted and put back together,it all works,now to get back on making it stitch,think my shuttle is to tight,think I put to thick of leather on the shuttle.

Are these the parts you are talking about

I am going to resurect this old thread instead of starting a new one,I am finally getting back on this machine,decided to fix the base and make it a foot powered machine again.

Thanks,I will check this tomorrow. I added the leather,didnt know how much to add as I didn't have the shuttle to start with.

still not working here is a shot of how it looked like the book said to thread the shuttle and after a couple cranks it just balls up without picking up the thread.