Tina1975

hello here is a link for the video of the whole gear system moving. It seems to be OK, I have only a doubt about the shuttle, it seems not to move at the same speed of the driving pinion. Do you think it is correct? http://youtu.be/ImAax2bLvy0 After having opened the sewing machine, I have seen that the gear scheme is a bit different from the one I find from internet (here enclosed). https://www.dropbox.com/s/gt864escylazpe2/Schermata%202015-03-19%20alle%2021.02.25.png?dl=0 https://www.dropbox.com/s/c5slr9dr5y9fw7m/Singer29K_braccio.pdf?dl=0 My question is if it is possible to find the correct spare parts for my gear system or is better trying to change the whole system. I wait for your opinion, thanks a lot to everyone that could help me in any way. Tina

Hello Geneva. The needle is new, found on ebay: Sewing needle 29X4 332LR DIx4 #24 leather point. Unfortunately the thread was already in the sewing when it was purchased and is very old, has nothing written on it. Can I have some advice on that thread buy? Thank you very much! Tina

Hello everyone, I'm sorry my English is not good, use an automatic translator. I bought a Singer 29K51, but I have a problem, I need your kind help and experience. I make the video: https://www.youtube.com/watch?v=vtp1XErj55w Maybe the problem is in these pieces? Because I see that it moves too if I move it with with my hand, until 5 mm in any direction. https://www.dropbox.com/s/xvs7n5ul8jy88s8/Schermata-2015-03-18-alle-11.16.35.jpg?dl=0 Thank you all for any help or advice. Tina