Jump to content

aldebaran1981

Members
  • Content Count

    11
  • Joined

  • Last visited

Everything posted by aldebaran1981

  1. dear all, i've been struggling very long with my edge finishing i keep wondering if it's the problem with my edge paint or my techniques i normally try to sand the edges down first, and then apply one or 2 coats of the edge paint. then i will use fine sandpaper to sand it down and then apply again with a handheld roller applicator is this the right way? i want to let my products have the proper finishing because I normally don't work with veg tan that uses a burnishing tool any advice is very very much appreciated..
  2. in the photo, the card pockets looks kinda stiff but goatskin is normally soft right?
  3. i tried using pigskin a few times and the effect wasn't really nice. so maybe my next step would be goatskin or kidskin no lining on the card slots meaning that the embossed leather used is pretty premium to be thin enough?
  4. what is "kidskin"? embossed cowhide i know. yeah i think it should be backed up with very thin goatskin or pigskin right? in that case, why isn't there a sewing line on the card slots to prevent the lining from fraying?
  5. looks stiff. it's not stiff right because being goatskin it should be soft.
  6. please critique have made a few wallets, mainly using cow embossed leather (not sure if I'm using the correct terminology) need to improve on my edge finishing as it is always my archilles heel
  7. dear all, been a while since I last posted. I have made a few wallets already But either the quality of my workmanship, or the type of leather I have been using has been preventing me from making real quality wallets I would like to know if anyone has made a full wallet out of goatskin or should goatskin be only be used for the interior part of a wallet? anyone has any samples of their goatskin wallets? I'm gonna post a few pictures of a wallet's interior which I am very curious about what material it is and whether during the construction process, is the backside of the leather being left bare or has 2 layers glued together? This guy's work is impressive and has inspired me to work harder! thanks!
  8. hi guys, I've just been into leathercrafting for a little over 4 months now. lovin it and hope to get better as time goes by. just sharing a few of my projects.
  9. is the yellowish rubber glue same as contact cement? because I have mainly the yellowish smelly rubber glue and white latex glue
  10. Hey guys, What kinda adhesive is best suited to glue pigskin to leather? Latex glue? Rubber glue? Do I glue the whole sheet of leather to the pigskin? Do i need to stretch the pigskin abit if I need to have the leather to fold into a flap to prevent wrinkles? Thanks for any inputs!
×
×
  • Create New...