hsp

Thanks for the reply I have a working Brother 727 DB2 which makes me not hurry with efka engine I have dismantled according to the picture but may not be of more from the shaft An error that I have not had named is that the decoupled when the rotated with noise but the lamb or seems to be ok Also missing wheel stitch length according to the picture and something wrong with the locking of the jaw and feeding so it is locked with a plastic band

Problem with Singer engine solved Only 65 years and still going strong.

Efka 5g21 Engine screaming and I will replace bearings How do you share engine I have taken off the pulley and fan but will not disassemble the clutch You will sketch on parts and manual in German but not service book

Hello I have a Singer 96k41 with a Simanco motor was running before disconnecting the electrical connections are not registered, tongues in the round lug on the loose cable 3 pin plug on the image, h loose cable, middle earth, v disconnected. 220-240v ac The cables on the insulation goes to the coals in the middle regulating nut on the rod speed via the lever to the foot pedal where should the cable screw fixed? very grateful for answers Hakan Svensson Sweden member of Leatherw...net