Coeta

Lol...I also thought about that if it is complete,,indeed everything is there except for the oil reservoir system and the needlebar thread guide that broke... If somebody can just list the order sequence of what to set i will give it a go again, then on the sequence where I struggle I will ask for assistance again and might get this to work again. thanx

Feed and feed dogs are moving...I thought I had the timing done correclty when slowly turning to check if the needle does not catch the hook..I somewhat loosen the screw for the needle bar because the needle eye was below the hook...tighten it up then the hook was to far away from the needle I loosen up the bottom 2 screws and tapped it slightly closer to the needle during this I have changed the stitch length as well and this is where it started to get messy, and everything started to cacth and scratch on everything and now it does not want to make complete full turns as it catch somewhere so I think the timing is now completely srewed up. I struggle with the adjustment of the lifting eccentric and the alt pressing feet,,,I am missing something in the manual procedure

Ladies & Gents this machine was lying in the backyard as an garden ornament. As you can see from the pics attached from awful to something that might work again. I managed to get new lifting and vibrating pressure foot and the thread tension system...I have put everything apart again and followed a few videos on you tube to see how I need to go to set and align everything to be in sync again from the needle bar height to the hook timing..when threaded and turning the hand wheel i cant get the material to feed under the pressure foot even if it is set to the max stitch length. So the machine does turn over. I got these manuals: 211G165_166_265_266.....211U157A_165A_166A_566A....I also watched the video on the Consew 225 Hook Timing Somewhere I must be missing something in the manual is there a set sequence from the start to the end to be able to get it to work again. If anybody can elaborate i would sincerely appreciate it or if somebody has a personalized video made of the setting and adjustment and can be able to share it online I would appreciate. I dont want to go to a specialist and pay them to do it because that would help me nothing if something happens again that it does not want to work and need to pay again. DIY here is of utmost importance.