Jump to content
If you see spam, or a scam, please report it!

richco

Members
 View Profile  See their activity

  • Content Count

    36

  • Joined

  • Last visited

Posts posted by richco

  4. Posted · Report reply

    5 hours ago, shoepatcher said:

    I think I have the long bar assembly.  That is about $90.00 us.  hARD TO FIND.

    GLENN

    Could you please send me measurements of it I can make it,just the spring steel and the adjuster is mild steel I do have milling machine and lathe to do the job I only need the dimensions please.

                            Thanks 

  6. Posted · Edited by richco · Report reply

    This machine looking great I am fixing my 29k2 which is missing parts I have ordered most of the parts except the leaf spring and adjuster one of great member on here offered me the help and parts but I want to fix this machine cheap l am looking to make this spring by myself if I can get the measurements as well as the breaket measurements here are some pictures of my efforts.

    20240816_175541.jpg

    20240816_175601.jpg

  7. Posted · Report reply

    On 2/6/2023 at 12:29 AM, Constabulary said:

    This is where you have the slider (far to the right)

    IMG_8646.thumb.JPG.b0004a93ca330ef8db9865604f7afa12.JPG

     

    This is where you want the slider (far to the left) - the further left the slider is the higher the foot lift. For moving the slider you have to loosen the wing nut or in your case the small lever on the slider.

    IMG_8647.thumb.JPG.efbbadd2e2b252dfb51b113f513c9852.JPG

    I just bought 29k2 sewing machine few parts are missing also missing the whole assembly showing in your pictures could you please tell me if I can buy this part it looks like a leaf spring and looks like easy to make one please guide me.

                             Thanks 

     

  13. Posted · Edited by richco · Report reply

    Hello All,

                 I have Pfaff 191post bed sewing machine i found this machine from a shoe making company they want to throw it in the metal bin this machine missing feed dog arm,feed dog,throat,pins,front and side cover,outside holding bracket for post ,after searching almost 2 years i found feed dog and arm,i made my own pins,made side cover,i am now ready to make front cover which have a screw with the jam nut what this screw actually do and how far is this screw from the top if i can get the some measurement of the front cover i can make this plate, I am also facing some issues when i installed the feed dog arm with the feed dog it sits almost 7mm far away from the needle please help me.Thanks  

  15. Posted · Report reply

    3 hours ago, kgg said:

    Which province are you in? Expect the prices for the PFAFF parts to be expensive if they can be had. The main contacts for PFAFF Industrial:

    Canada:

    PFAFF Industrial Canada Inc
    5.03 Google reviews
    Industrial equipment supplier in Montreal, Quebec
    Address: 4949 Boulevard Métropolitain E, Saint-Leonard, Quebec H1R 1Z6
    Phone: (514) 389-7836

    All of North America:

    DAP America, Inc.
    PFAFF Industrial Division
    5875 Peachtree Ind. Blvd.
    Suite 220
    Norcross, GA 30092-3677
    Phone: 770 446 8162
    Fax: 770 446 7521
    ricardodossantos@dapamerica.com
    http://www.dapamerica.com/

    kgg

    Any china clone for Pfaff 191-194 maybe i can use parts from clone machine hopefully cheaper then oem parts.

  17. Posted · Report reply

    Hello All,

                 I have a pfaff 191 post bed machine i am missing all the parts from the post,i did try most of online stores and local stores but no luck can any one please help me to find these parts here is the list of the parts i am looking.for
    91-010165,91-010896,91-048300-93 or 91-048131-04,91-058258-04,91-000422-25,91-047858-04,91-010964-91,91-048377-04,91-000089-15,91-047143-04,91-048138-04,91-047061-04,91-048122-04,91-047054-04,91-012453-45,91010950-91 is there any china machine math to pfaff 191.
    Thanks

  19. Posted · Report reply

    Hello All,

                 I am looking for Techsew 810-2 post bed twin needle  sewing machine overhaul (engineering service)manuals I got this machine used,left hand side bottom gear was replaced by me now I need instructions how to install left side post correctly and time it please any one can help me with the manuals, even golden wheel CS820 repair manuals will work for this machine.

            Thanks 

  20. Posted · Report reply

    Hello All,

                  I had lots of other issue with this machine which i now able to fix with the help of members here, I am having trouble with auto reverse feed lever there is no spring tension on the lever when, Ii set the stitch length by the diel pin does not touch the cam which move the lever updown been reading manual and trying to set it but no luck can anyone please help me with this issue.

                                                    Thanks 

  21. Posted · Report reply

    Hello Constabulary,

                                    Thanks for your reply, i did try with the reverse lever all the down,stitch look good then i try to run the machine when lever all the way up stitch was very nice and leather feed through,now i know some settings are off on reverse feed lever,if you have any better idea to fix it please let me know.

                                                                                                                                                                                                                                               Thanks

  22. Posted · Report reply

    Hello All,

                  I been working on my machine but no luck i can not fix the stitching problem Kgg send me some manuals, is anybody worked on these machines please help me, now all of my settings are off machine turns but little hard to turn,stitching still very very small on long stitch settings..

                                                                                                                                                                                                    Thanks

  23. Posted · Report reply

    4 hours ago, kgg said:

    Try the following link, Chapter 15 Height of Feed Dog and Chapter 16 Adjusting the walking foot and presser foot.

     

    https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjZ-N-O3cbvAhW8GVkFHX8VDjEQFjAAegQIBRAD&url=http%3A%2F%2Fwww.juki.co.jp%2Findustrial_j%2Fdownload_j%2Fmanual_j%2Fdsc240%2Fmenu%2Fdsc246%2C-7%2Fpdf%2Finstruction_eg.pdf&usg=AOvVaw3QW7CAPsYD4bN-kd6LF8GW

     

    kgg

    Thanks a lot Kgg,

                                 I am now able to turn the machine, I did try to stitch a leather but now i am getting very short stitch even i am on long stitch setting could you please help me with this issue.

                                               Thanks

  24. Posted · Report reply

    Hello All,

                  Can some one please guide he how i can adjust the height of walking foot bar,i bought this machine as used,it was very dirty and oily(but it turns and stitch) so i decide to remove and clean the parts, now i have every thing back together, it turns fine as long there is no presser foot on it but when i install the presser foot it get contacted with the feed dog,does any one have engineering repair manual for Juki DSC246 please help me. 

                                                                                                                Thanks

×
×
  • Create New...