Pfaff Threading Problem

[Pfaff Threading Problem]

have you gotten the parts for your  machine ..if not you should call Boyd Walker in Spokane  or better yet just take the head to there and ask for Darrel  the machine is well worth getting the  correct  parts and being installed correct.    you need someone close by ...good luck ..Dave1

[What Am I Doing Wrong]

Gainesvilleman...your description   you may have a burr on your hook...... your check spring may be holding on to long     your bobbin case opener may not be opening enough, or not releasing in time to allow the top thread to pass.  it really seems that there is a sharp spot... If your needle barr is to low the hook flange will deflect the thread   if the needle barr is to high the hook its self could be cutting the thread......Check your needle barr height/ where the hook crosses the eye of the needle ..your friend Dave1 

[Please help! Pfaff 1245 706/47 has loose bottom stitches when reversing, and short stitch length.]

First, on the very back of this machine , there is a pair of brackets and a curved slide . It may have  a thumb screw, or a small maybe a 8mm nut.    this sets the height of the step of the toe foot , the back foot responds  to the toe foot . At the lowest setting  the machine is  working very lightly. at this point both feet are rising/ lifting  about the same height. This setting is for flat work . And I believe the best setting for adjusting tensions both top and bottom. Set your stitch length at about half  way just not full way, and try this on blue jean fabric.  Also back the top tension off 1/2 turn to start , and use black on top and white  on bottom ,for good contrast......we may need to adjust the check spring and the bobbincase opener as well .....does this machine have large bobbins..   good luck Dave1.