DDBlanco

Thank you Wiz. I appreciate the input

I'm looking to purchase some different presser feet for my Bogle Greenwell SHS Harness Stitcher. From what I can tell, it's similar to a Cobra 3/Cowboy CB3500. Just wanted to see where others were purchasing accessory feet from, and if you've been happy with your purchases. Thanks in advance for any help/tips.

*Update* I finally got around to adjusting the allen head screw RockyAussie recommended. And YES! That is exactly what my issue was. Thank You very much for your advice, it was a huge help.

Thank you very much for the tip. I'll give it a try and report my findings. Thanks again!

I recently purchased a used Bogle-Greenwell Model SHS sewing machine. I believe this is the same class as other 441 clone machines (Cobra Class 3/Cowboy CB3500 etc.). I found an oiling diagram for a Cowboy CB3500 online, and used that to lubricate the machine prior to purchasing. I was able to get the machine running and made several test stitches. However, the rear Presser Foot is not moving, up and down, when the machine stitches; it just keeps constant pressure on the leather as the needle and needle foot move the material. I started doing leather work about a year ago and have very little knowledge about working on/with stitchers. Any advice or resources will be greatly appreciated. I've attached a picture of the machine and the presser foot that is giving me issues (RED arrow).

What are you asking for it? Are you willing to ship? No trade, just cash.