Jump to content

Search the Community

Showing results for tags 'busm hm6'.

  • Search By Tags

    • busm hm6 ×
    Type tags separated by commas.

  • Search By Author

Content Type


Find results in...

Find results that contain...


Date Created

  • Start

    End

Last Updated

  • Start

    End

Found 4 results

  1. gordond
    Hi all in conversation with Constabulary about needle clamp screws for the BUSM HM6- what screw system are they? none of mine line up with BSW [or BSF] or any other system.. I believe Al has been through this before and ordered some offshore - but they didn't fit? just putting this out in the p...
  2. gordond
    BUSM HM6....No.7536

    From the album: gordond's Machinery NewZealand

    Al Muckart's BUSM HM6....had been soda blasted. now in my machine stable ...re-assembled ;awaiting restoration.

    © gordondnz2014

  3. gordond
    BUSM HM6....No.7114 ...stand restoration

    From the album: gordond's Machinery NewZealand

    just a photo of what I have doing over the last few weeks. not the best casting -took a lot of time to flatten this smooth.

    © gordondnz2014

  4. gordond
    BUSM HM6 lettering before and after ..

    From the album: gordond's Machinery NewZealand

    for Steve... before and after lettering.. [using magnifying goggles]..the lettering was engraved and reshaped with a dremel - carbide tip ie/. recut "the holes in the "o"s and the "d"s. then the top of the lettering was sanded or filed flat... any holes were filled with Pratley's 2 part steel p...

    © gordond nz

×
×
  • Create New...