Search the Community

Hi all - I’m sure many on here have seen (and like me, drooled over) the Fred Moreau clams that a few lucky souls were able to get their hands on. For my part, I’m still working with a very inadequate Tandy stitching pony, while continuously promising myself that I’d one day get around to building something bigger and better. That day finally came when I visited home for the Christmas holidays and I convinced my dad to donate his skills and equipment as a woodworker to help me in my endeavor. My goal was simple – create something as close to the Moreau clam as possible. Anything else just seemed inferior. For the wood I used zebrawood for the jaws (each jaw is a laminate of 4 pieces at about 1/8” thickness each, bent into shape with a custom form), walnut for the base, maple for the “lips”, and a combination of walnut / ash for the wedged dowels. Overall, the piece is 100 cm from tip to base, and has a little over 20 inches of space to work with on larger format projects. The one improvement for next time (if there is one), is to add some sort of internal “guide rails” on the jaws to keep things aligned well. The hinge has a little bit of play, so there’s some lateral movement that I’d like to get rid of. I’ve tried to chronicle the build process in the imgur album blelow (I’ll apologize in advance for my pictures – I’m slowly being convinced to spend money on a nice camera). This hasn’t been put into action just yet, but am looking forward to tossing the old tandy stitching pony, and actually being able to stitch bigger things like bags without holding them in my legs BUILD ALBUM: https://imgur.com/gallery/7C6NI1t