Search the Community

Hello all! So I am a bit new to the site, and heck pretty new to leather working in general. Did some as a kid, that’s about it! That said I’m not new to business. My dad has been self employed since I was a youngin’, and I’ve been running the family business for years now. Short version of the story is different size roller buckles in Stainless Steel, Made in USA of US steel, delivered to your door for around either $.99 or $1.30 a piece (depending on finish) at the 1.5” size. Skip to “So here’s the deal:” if you don’t want to read my other blabbering! Sorry for the novel in advance, but I like to be very clear and detailed about things. Here’s my conundrum. I want to start making leather goods as a half way serious thing right off. Serious as in very high quality, not necessarily high quantity. I want to use nothing but the best components. Furthermore I want 100% of my components to be made in USA. I was always taught if you’re going to do somethin’ do it right! Belts and bracelets to start, and we can see from there. I want to start with black leather and all Stainless Steel hardware. Eventually I imagine I’d get into doing brown with Solid Brass. The SB is not too hard to come by made in the USA, even in small quantities. The SS seems to be almost entirely special order. So the issue is, as was discussed in this thread (http://leatherworker.net/forum/index.php?showtopic=40488&st=0) is that many of the manufacturers have high minimums… Higher than most of you guys who have been doing this for a long time and have established customer bases even want to touch. For anyone who sees it, I would also like to note the steel roller buckle the one member purchased from Custom Metal Crafters there is NOT made in USA. Maybe it was at the time, but when I talked to them a couple weeks ago it is now imported. So here’s the deal: I have a firm quote from Philip Machine on SS Roller Buckles, and in my opinion their flexibility is pretty awesome. Because they have to buy a certain minimum of the SS stock they need to make approximately 5000 units (based off all 1.5”)… BUT they are willing to mix and match buckle sizes and number of prongs for basically nothing extra. Smaller ones will be cheaper than my example below, and bigger ones more or less go up proportionally to the amount of extra SS they use. They manufacture 100% of their products in the USA, and in my opinion are a great company to support. The guy I talked to knew his stuff, and was able to give me an instant quote. If (lord forbid) there is enough interested to get above 5000 units, I imagine we can get the price down even more than as listed below. 1.5”x1.25” SS roller buckles .215 diameter for the main wire (this is a regularly available SS stock, perhaps slight variation is possible though) .135 or .152 diameter for the prongs $.70-.79 a buckle (he didn’t check exact current pricing on the raw stock, but in this range) This is with their “regular” finish, which he said is slightly duller than regular nickel plating. He said they can do an ultra high shine finish (some sort of buffing type thing or other process I forget the technical name he used. I think it was chemical based. NOT plating, still solid SS) that will get the finish up to basically looking like chrome. This is something they sub out to a company down the road a piece, and it costs $.27 cents a unit their cost, they usually mark up to around $.31. Going with the high figures this brings the total price to $1.10 a unit. Shipping is roughly $.08-.10 a unit. Reshipping cost to you guys let’s assume the same. GRAND TOTAL: $1.30 delivered to YOUR front door using the high numbers. That is what it will cost delivered for the ultra high shine, which is what I want to go for. They can NOT do the high shine on all units, so doing the regular finish brings down the cost around $.31 a unit, so $.99 delivered. Keep in mind that’s for 1.5”, so bigger/smaller ones will vary the price. So here’s what I’m thinking. I have the cash to put up for the order, I just don’t want to spend $6,000 bucks and sit on it. It could be a LONG time before I could get rid of that many buckles. If I could find enough people to offload say 90 percent of these, I will do them straight up at my cost + shipping to you guys. I would think we could get shipping down to $.10ish a unit to reship to other people. If I can line up enough to get rid of just a good chunk, I could also possibly still place the order and sell them to people at some reasonable “profit” for myself to help offset me sitting on a ton more buckles than I need. I’m thinking I would like 1.5”, 1.75”, and 2” buckles all in 1 and 2 prong variations. 1” perhaps in single prong. What does anybody think? You literally CAN NOT find SS made in USA roller buckles to purchase in reasonable quantities anywhere. I looked. Everywhere. If someone knows of one, please tell me! But I don’t think you can find them period. So basically whoever gets in on this will be the only ones who can say they use them in their products, and the only ones who can retail them as stand alone buckles through their businesses. We’d have the market cornered J I am also open to becoming the “minority partner” in this endeavor if someone else maybe wants most of them for themselves and just wants to use my lead. I will gladly pay someone a tidy profit to avoid having to shell out all the cash up front. NOTE I also have a pending quote from another company, so we’ll see where they land. They are a bigger outfit, so they might be able to come in cheaper… But it sounds like quantities would be higher by a good bit. I think public discussion is preferable, but send me a PM if you’d like! I’m just throwing this out there, and not necessarily in a huge rush to pull the trigger. If there is enough interest I will though! I’ve secured low volume sources for nickel plated steel made in USA, and perhaps I’ll just start with that and offer the “All Solid Stainless” line later as a “product improvement” if I have to. If you want info on those let me know, they can go down to under .50 cents per! This is my last “hurdle” for basic all SS items. But I wanted to gauge the interest!