Davidmadd Report post Posted April 25, 2022 I recently acquired a Pfaff 341 which appears to be in great condition. I'm seeking some spares for it but can find little about this machine on the internet. There appears to be only the one presser foot that is fitted on the machine and no alternative patterns of presser foot available. It seems to be about 1/4" longer than a standard Industrial machine shank. It would benefit from having a replacement feed dog. I also have just the one bobbin so some more would be useful. Can anyone advise of a potential source for replacement parts for this machine (ideally in the UK) and possibly explain why there is so little info available on the net?? Thanks in advance David; Plymouth; UK Quote Share this post Link to post Share on other sites
Constabulary Report post Posted April 25, 2022 Its a rare machine (needle feed + drop feed but no alternating feet as on the Pfaff 345)! The feet of the Pfaff 141 should work but they are rare too, also Pfaff 141 / 145 bobbins should work. But better check the measures. https://www.college-sewing.co.uk/10079-steel-bobbin-pfaff-145-146-seki.html I would check with College Sewing, they seem to have OEM Pfaff parts as well as generic parts,. maybe they can get you some 141 / 341 feet. Quote Share this post Link to post Share on other sites
Davidmadd Report post Posted April 26, 2022 Thanks Constabulary - I have searched their website and made enquiries by e-mail but no response yet but that was only for the 341 parts. I will also lookout for 141 feet. Much appreciated David Quote Share this post Link to post Share on other sites