nuki Report post Posted June 15, 2022 I was curious if anyone knew the name of the hardware on this leather piece (not the shackle). I have looked everywhere and tried buying different parts to try to make them. I have seen then on expensive items and also made cheaply. The ones I have tried purchasing are held in on the other side of the leather by screws. They don't seem to have a plate that is generally seen with bag hardware. The bag hardware I did try tends to have a thickness of the loop at maybe 6mm or so and shallow as to make it sort of hard to pass anything through it. I am looking for maybe a 3mm thickness in the metal itself.. I hope yall have some ideas, this is driving me crazy. Also does anyone have any tips for collar/cuff sizing? I would really like to start doing custom, but I have zero confidence. One of my measurements for a cuff was small and another was too large. I was taking actual measurement and adding 1/2 an inch. I am not sure which specifications to follow for leather collars. Also if anyone has tools for accurately measuring the sides of what is already made. I have a mandrel for bracelets. Not quite sure how to accurately do collars. Thanks!! Quote Share this post Link to post Share on other sites
Argo16 Report post Posted July 15, 2022 (edited) where did you find those images? however, that system is really insecure. Edited July 15, 2022 by Argo16 Quote Share this post Link to post Share on other sites
