Members ElFishbone Posted September 13, 2022 Members Report Posted September 13, 2022 I read a post (Gottaknow 2014) about a pneumatic presser foot lift with a knee switch. I recently purchase a Consew 146RB-1A that has a pressure regulator with a solenoid and a switch on the knee lift. Mechanical lift parts are not there. It has an air tube that is not connected to anything, but I believe would connect to an air cylinder. I’m not sure if a cylinder can be attached or how it would. If any one could provide a picture or information on how all this looks when connected, I would appreciate it. Elfishbone Quote
Members Constabulary Posted September 21, 2022 Members Report Posted September 21, 2022 maybe you should post pictures of your machine and the "parts situation" cause industrial sewing machines are often set up / equipped in different ways. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.