Members Schpacko Posted January 10, 2023 Members Report Posted January 10, 2023 Question for the Watch Strap Specialists in here. How do you do that little oblong hole for the quick release Spring Bars? Do you have a tiny oblong Punch? Quote
Members Tugadude Posted January 10, 2023 Members Report Posted January 10, 2023 Seems a punch would be much easier but with my limited tools I would punch round holes at each end and then connect them with two straight cuts. Scalpel or X-acto Knife for the straight work. Quote
Members Schpacko Posted January 10, 2023 Author Members Report Posted January 10, 2023 2 minutes ago, Tugadude said: Seems a punch would be much easier but with my limited tools I would punch round holes at each end and then connect them with two straight cuts. Scalpel or X-acto Knife for the straight work. Yeah, thats what i do, but it doesnt always turn out as pretty as i want Quote
Members Jdswitch Posted February 28, 2023 Members Report Posted February 28, 2023 I have one of these. Super easy to use and perfect results everytime. I'm in the UK so the link is to the UK site where i got them but you'll be able to get them in Switzerland i'm sure. You can get really expensive swiss made ones but they seem over-priced. You could also use a small oblong punch and slide a cocktail stick in where the spring bar will go to punch against. https://www.cousinsuk.com/product/notch-cutter-tool-quick-release-spring-bars-cousins-swiss-style?code=C60723 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.