Members scoggim Posted February 10, 2023 Members Report Posted February 10, 2023 Looking at potentially purchasing a Juki LZH-1290 Sewing machine. but wanting to know if anyone has ever used it as a binder? I make a 3 layer nylon pouch using 3/4 raw edge binding, I am currently binding on a cylinder arm machine but would want to be able to do it on this machine if possible? Quote
kgg Posted February 10, 2023 Report Posted February 10, 2023 On 2/10/2023 at 12:44 PM, scoggim said: I make a 3 layer nylon pouch using 3/4 raw edge binding, I am currently binding on a cylinder arm machine but would want to be able to do it on this machine if possible? Expand I am not familiar with the Juki LZH-1290 machine but as long as the bed has the holes to accept attachments located to the right and centered to the right of the needle you should be a able to use a binding attachment. Using 3/4 inch binding tape would probably be best done with the zig zag set to zero ( 0 ) so the machine is being used as a straight stitch machine. If I'm not mistaken this is a drop feed machine. The question I have is why the Juki LZH-1290 rather then a 1541S or even a 1181N or is the zig zag feature an important need? kgg Quote Juki DNU - 1541S, Juki DU - 1181N, Singer 29K - 71(1949), Chinese Patcher (Tinkers Delight), Warlock TSC-441, Techsew 2750 Pro, Consew DCS-S4 Skiver
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.