scoggim Report post Posted February 10, 2023 Looking at potentially purchasing a Juki LZH-1290 Sewing machine. but wanting to know if anyone has ever used it as a binder? I make a 3 layer nylon pouch using 3/4 raw edge binding, I am currently binding on a cylinder arm machine but would want to be able to do it on this machine if possible? Quote Share this post Link to post Share on other sites
kgg Report post Posted February 10, 2023 20 minutes ago, scoggim said: I make a 3 layer nylon pouch using 3/4 raw edge binding, I am currently binding on a cylinder arm machine but would want to be able to do it on this machine if possible? I am not familiar with the Juki LZH-1290 machine but as long as the bed has the holes to accept attachments located to the right and centered to the right of the needle you should be a able to use a binding attachment. Using 3/4 inch binding tape would probably be best done with the zig zag set to zero ( 0 ) so the machine is being used as a straight stitch machine. If I'm not mistaken this is a drop feed machine. The question I have is why the Juki LZH-1290 rather then a 1541S or even a 1181N or is the zig zag feature an important need? kgg Quote Share this post Link to post Share on other sites
