dgs59 Report post Posted October 25, 2023 Just bought a c o n s e w 7360r Industrial having trouble setting it up and cleaning it up also how to slow it down any help would be appreciated thank you Quote Share this post Link to post Share on other sites
Wizcrafts Report post Posted October 25, 2023 3 hours ago, dgs59 said: Just bought a c o n s e w 7360r Industrial having trouble setting it up and cleaning it up also how to slow it down any help would be appreciated thank you I have news for you about the slowing it down part: "Ultra High Speed, Single Needle, Drop Feed, Lockstitch Machine" "With: Automatic Lubrication, Reverse Feed, Japanese Components" Here's the product page. Despite the requirement to run this machine at very high speed, it can be slowed down with a servo motor. Before you start sewing, unthread it and run it flat out for a half minute. This will pump the oil to the extremities. This is assuming you got the table containing the oil pan and gasket. The machine is not meant to just be manually oiled. It is a garment manufacturing machine. It is not rated for sewing leather. Quote Share this post Link to post Share on other sites
