GerryR Report post Posted December 1, 2023 (edited) The answer was in this old post, so I found no need to repeat it, but I will restate it: The Enduro Drive SM645B-2P position system makes two additional machine revolutions before stopping, when the foot pedal is released. Uwe, in the referenced post, found that it is an actual flaw with the drive and was never fixed by the manufacturer. He did state, however, that the 2P version (220v w/ position) did not have this problem, but that isn't so, as mine do have the same problem. I may have a fix for this problem, and was intending on posting it, if it works, so that others would be able to apply it. I will report back later. Edited December 2, 2023 by Northmount updated Quote Share this post Link to post Share on other sites
