Members johnny7 Posted November 25, 2007 Members Report Posted November 25, 2007 Hey guys and gals, Just finished this one last night. Have a great week!! Johnny Quote
Members johnny7 Posted November 25, 2007 Author Members Report Posted November 25, 2007 Sorry about posting the same pic twice. Meant to post this one. And also this one. Quote
outcast Posted November 25, 2007 Report Posted November 25, 2007 Nice seat johnny. Keep doin what yer doin. It's looking good. Steve Quote
Ambassador Beaverslayer Posted November 25, 2007 Ambassador Report Posted November 25, 2007 Very nice johhny, looks real good. Ken Quote
Members johnny7 Posted November 27, 2007 Author Members Report Posted November 27, 2007 thanks guys, got a lot of small leather pieces left and am going to try something new. Quote
Guest Posted November 27, 2007 Report Posted November 27, 2007 Johnny, Nice work, my only advice is to make sure in your seat mount that you don't have steel or billet contacting the leather. It will eat up the leather and make for an insecure mount. That is why I have such large spring holes in my backs and why the entire middle of my back is cut out. I want the springs and brackets to mount steel-to -steel. Dave Quote
Members johnny7 Posted November 27, 2007 Author Members Report Posted November 27, 2007 Thanks for the advice Dave, Make like a 1/4" high, 2.0 dia. plug that is threaded and weld it where I want the mounting bolt to go, screw a threaded rod into it and butt the leather up to the plug. Never thought of what the spring would be doing to the leather. thanks again for the advice. Johnny Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.