Members SmilinJim Posted November 28, 2007 Members Report Posted November 28, 2007 (edited) Need some suggestions. Doing another bag. Will be for brother-in-law blackpowder works. I cut a strap 1 1/4" wide and will line the backside of it. I had originally thought to attach with tabs to the front, you can see where I left off lacing and left tab attach points. But I think attaching to the side gusset may be better. Any thoughts or rules to go by? Still got to lace the flap and will continue lacing over tab points or lace tabs to strap. Will be non-adjustable strap. Made just for him. Competeing for wife for table space. She's painting Santa sweatshirts for Christmas. Jim Edited November 28, 2007 by SmilinJim Quote
Ambassador Beaverslayer Posted November 28, 2007 Ambassador Report Posted November 28, 2007 WOW, those are BEAUTIFUL Sweatshirts. Oh yes, the bag strap....I'd put it on the gusset, I see that you already have made accomodations for it there. Ken Quote
Members Rayban Posted November 28, 2007 Members Report Posted November 28, 2007 I agree on the gussets, and I look forward to seeing the bag when you're finished with it! Thanks Quote
Members fishguy Posted November 28, 2007 Members Report Posted November 28, 2007 I have made quite a few of these and generally attach them to the back, though I have also made and seen designs where they are attached to the gussets and even the top of the bag. Since this type of bag was typically home made, or by some local saddle or harness maker there was a wide range of variation and no really "right " historical solution. Looks like you have made accomodations for the straps on the gussets and from the design it looks like it would be the best place to attach them. Quote
Members Ross Posted November 29, 2007 Members Report Posted November 29, 2007 i vote for gussets. it puts less strain on the stitching when loaded imo. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.