kgg Posted October 30, 2024 Report Posted October 30, 2024 1 hour ago, Gryning said: I tried to film when the thread loops over the shuttle and when I did some stitches with the hand wheel. Looking at your first video it appears the tap on the bobbin case is not in the slot on the underside of the needle plate. kgg Quote Juki DNU - 1541S, Juki DU - 1181N, Singer 29K - 71(1949), Chinese Patcher (Tinkers Delight), Warlock TSC-441, Techsew 2750 Pro, Consew DCS-S4 Skiver
Members Gryning Posted October 30, 2024 Author Members Report Posted October 30, 2024 6 hours ago, kgg said: Looking at your first video it appears the tap on the bobbin case is not in the slot on the underside of the needle plate. kgg Hi, Yes that is right. The needle plate isnt there at all. I took it away so that the thread loop would be more visable. Im holding the tab with a screw driver to keep it from jamming Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.