mimicry Report post Posted November 8 Hello, I've got a Kaev C105 clicker press. It's an old clicker with a manual/mechanical arm adjustment. I've managed to set the machine to cut the leather, but it was a trial and error route. I would rather understand how the adjustment process should be done properly. Photo of the arm attached. Maybe some of you could help me out with a manual for this machine, or a similar one with mechanical stroke adjustment? Would be a great help for me. Kind regards, Mike. Quote Share this post Link to post Share on other sites
ljk Report post Posted November 8 I've owned a Model C, a Fipi 20 and a Schwabe. Can you sent more pictures. I may be able to help. My model C sat out in the Fl. weather for 3 years paid 80 bucks delivered. Need to keep it oiled. Quote Share this post Link to post Share on other sites
mimicry Report post Posted November 8 Here is machine: Quote Share this post Link to post Share on other sites
mimicry Report post Posted November 8 (edited) I know the bigger aluminum one is te set arm height, and the three armed black one is to adjust the cutting depth. But still it works kind of mysterious to me, like when I adjust the height of arm, the depth of cut changes too. Edited November 8 by mimicry Quote Share this post Link to post Share on other sites
mimicry Report post Posted November 11 I can't even find any clicker press with this kind of stroke adjustment.... Any clues..? Anyone ..? Quote Share this post Link to post Share on other sites
