Junker and Ruh sd28 Parts

[Henry]

Greetings People,

I'm searching for some parts for a Junker und Ruh SD28 sole stitching machine. Specifically the ones in the pictures. I also have brand new Shuttles and bobbins available if anyone is interested. For either the Junker Machines or the Pedersen no. 208 machines. They are essentially identical.

I also have some other used parts available for these machines as well.

If you can help in any way please let me know. And if there is interest in the shuttles or bobbins or other parts let me know.

Thanks, Henry,

Toronto, Canada

[Constabulary]

I may have the tension part in in the 2nd picture, can you give me the outer diameter and the measures of the center hole with the flat side.

[Henry]

Thank you. The outside diameter is 25 mm and the diameter of the inside hole with the flat side is 6mm.

Do you have this machine and do you need anything yourself for such a machine?

IMG_9115.HEIC IMG_9114.HEIC

[Constabulary]

I had one a some years ago. Cool needle feed machine but it was nearly useless for what I did and hand cranking is so annoying when you want to sew longer seams so really nothing I would recommend nowadays but for f.i. for the custom shoe trade (and the like) a really well made machine but needles are rare and expensive.

I´ll check for the part this weekend or on Monday.