Tippmann 15 Ton or Hydraulic

[AaronStand]

I'm in the market for a 15 ton press whether the Tippmann or a standard hydraulic clicker. Anyone have any feedback on the Tippmann? I've read a few statements that claim it does not hold to a true 15 tons of pressure, but again those are far and few between. Tippmann claims it can cut 1/2" leather. I think the thickest I would be cutting is 1/4", but those will be very intricate 30" dies with up to fifty(50) 1/16" to 1/8" punch holes. Not here to bash the name, but need transparent feedback on actual performance.

[kgg]

1 hour ago, AaronStand said:

I'm in the market for a 15 ton press

The question should be will a 15 ton press be sufficient to handle what you need. I would get the suppliers to do the calculations for you.

Once you have that answered then you will be better able to determine what the best machine for your needs and budget would be regardless of supplier.  

kgg

[AaronStand]

The question is for feedback on the Tippmann. Whether a 15 ton is sufficient or not is irrelevant if the press indeed does not perform the 15 tonnage. And if it does not, then I would be hesitant to ask the supplier for their input. But yes, I suppose I could mail the dies and material in for a trial run.

[kgg]

6 minutes ago, AaronStand said:

Whether a 15 ton is sufficient or not is irrelevant if the press indeed does not perform the 15 tonnage.

Sorry. Best of luck.

kgg