Members dozernmike Posted June 18 Members Report Posted June 18 I am looking for a landis 3 loop thrower. The little finger with a hole in it that moves the thread in front of the needle. I have tried the landis number for a few months but I'm not getting an answer. I thought I would see if anyone has one before attempting to make one out of a 5/32 aircraft drill bit. Quote
Members mbnaegle Posted June 20 Members Report Posted June 20 (edited) I think the Campbell one might interchange, if you change out the holder for it. I think it was all one "L" shaped piece on Randall's and Landis 3's, but the new 2 piece Campbell style interchanges with the Randall at least, and it gives a little more adjustment to get the eye just where you want it. CHS-602 for the thread eye which is straight with a little bend on the eye end and is .124" diameter. And CHS-593A for the holder which is .186 diameter on the vertical end, if you want to check it. Edited June 20 by mbnaegle Quote
Members dozernmike Posted June 20 Author Members Report Posted June 20 That is helpful information. Thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.