Members DMH Posted Tuesday at 03:39 PM Members Report Posted Tuesday at 03:39 PM Hello, I'm looking for help with the knee lifter placement for my recently purchased Singer 112W115 double needle machine. I purchased a table top and had some difficulty finding mounts for the machine head, but finally got that resolved (I think). I installed the oil drip pan, motor and belt. I purchased a knee lift (photo attached) and lined it up with the space in the oil drip pan, but when I try to engage the knee lifter it does nothing. What am I missing or doing wrong? Where should the knee lifter make contact with the machine? Quote
Members Constabulary Posted Tuesday at 05:20 PM Members Report Posted Tuesday at 05:20 PM please post pictures of your machine from the rear and when tilt back from the underside and how you have installed the foot lifter. Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members Constabulary Posted 2 hours ago Members Report Posted 2 hours ago I cannot see how you mounted the lifter but what I can see is that the roller (224413) on the lifting rod (240550) is missing (isn´t it?) and the orientation of the "tab" is wrong. It has to be like the red frame IMO the longer end has to face right. Thats what I can tell the rest is trial and error where you put the foot lifter assy. Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.