Saddle Pack - A Design of Yesteryear

[ClaimedVacancy]

@MarshalWill Thank you for the suggestion! I very much so like what you did there. I have experienced some discomfort with the handle at the edge even with it beveled to a #3 beveler. So fortunately i can make the adjustment to it.

For the design, it’s fantastic. Once i made all the minor adjustments on the template to account for various lengths of parts, stitching edge distance, etc, it just kinda fell together. The way the Swiss designed this is a huge testament to their craftsmanship. 

I have three more Swiss bags that I'm working the templates out. All various shapes and designs. I’ll be sure to post once completed. 

[MarshalWill]

6 hours ago, ClaimedVacancy said:

@MarshalWill Thank you for the suggestion! I very much so like what you did there. I have experienced some discomfort with the handle at the edge even with it beveled to a #3 beveler. So fortunately i can make the adjustment to it.

For the design, it’s fantastic. Once i made all the minor adjustments on the template to account for various lengths of parts, stitching edge distance, etc, it just kinda fell together. The way the Swiss designed this is a huge testament to their craftsmanship. 

I have three more Swiss bags that I'm working the templates out. All various shapes and designs. I’ll be sure to post once completed. 

The whole trick is to work back and forth along the handle until the desired amount of  leather has been molded over. Too much hammering at once will flatten the handles. We used to do that when covering the steel surcingle handles for exhibition/circus riding. Those handles had to be good to take the performers' weight without hurting their hands. I just decided to try it on a hollow tote handle and it worked well.