Members oldfarmboy Posted February 10 Members Report Posted February 10 Moderators if this is not a good forum for the above machine perhaps you could direct me to a better site. I've found operator and parts manuals that are similar but don't have much information on oil levels. There is a site glass but it is not possible to fill to that level as there is a screened opening on the bottom sump and oil pours out. There is no other method such as a port or dipstick to determine the oil level. If anyone should have information relating to this machine would be much appreciated. TIA Quote
Members oldfarmboy Posted February 12 Author Members Report Posted February 12 Found the answer. There is a float with pin which is visible in the site glass. It should be between the two lines. Not something one would notice easily. Quote
Contributing Member friquant Posted February 18 Contributing Member Report Posted February 18 Oh I get it...you were pouring oil in waiting for the oil to reach the sight glass.. The float pin on my industrial overlock (Union Lockstitch 39500) came with a red painted tip, so it's high visibiliity. Quote friquant. Like a frequent, piquant flyer. Check out my blog: Choosing a Motor for your Industrial Sewing Machine
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.