Members ben27 Posted Sunday at 07:17 PM Members Report Posted Sunday at 07:17 PM (edited) Dear all, I now own a pfaff 26 - 2/01 - CSN8. It seems to missing part number 91-001 109-15. That is the clamp for the needle/ needle clamp. Can anybody point me in the right direction or help me to think of a functional alternative? Thank you very much in advance! Kind regards, Ben Edited Sunday at 07:19 PM by ben27 Quote
Members Constabulary Posted Monday at 06:26 AM Members Report Posted Monday at 06:26 AM (edited) The number is not correct - when I google it it comes up with "Gewindestift" which is a screw. https://www.bischof-naehmaschinen.de/products/91-001-109-15-gewindestift the parts number of the complete needle clamp is 91-006 770-92. I have several needle clamps but I´m not sure which could work. I´ll take a look of what I have.... BTW - there should be no additional tensioner above the main tension unit there should be just a 3 hole thread guide or similar thread guide. Edited Monday at 06:43 AM by Constabulary Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members ben27 Posted Monday at 08:50 AM Author Members Report Posted Monday at 08:50 AM (edited) 2 hours ago, Constabulary said: The number is not correct - when I google it it comes up with "Gewindestift" which is a screw. https://www.bischof-naehmaschinen.de/products/91-001-109-15-gewindestift the parts number of the complete needle clamp is 91-006 770-92. I have several needle clamps but I´m not sure which could work. I´ll take a look of what I have.... BTW - there should be no additional tensioner above the main tension unit there should be just a 3 hole thread guide or similar thread guide. Dear Constabulary, thank you for your reply. I checked the number you shared and found a photo of the part online! If you happen to have this needle clamp that would great and I would be happy to buy it! And thank you for pointing out the missing 3 hole thread guide...Another search I think...Kind regards, Ben. I am based in the Netherlands btw. Edited Monday at 08:51 AM by ben27 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.