Guitar Strap

[Go2Tex]

Thanks for sharing. That is very nice work. I see no mistakes and that lettering is great. What tool did you use for the matting around the letters? Also, was that saddle tan antique or highlighter or what? I assume that was mahogany dye on the edge? The combination works really well.

[rdb]

I see no mistakes and that lettering is great. Thanx Go2Tex, the longer I look, the worse it looks...lol

There's something inside me that will not allow me to do things perfectly, even though I'm quite able to do better. It goes back to the pricing thread, I think. To keep my stuff in a price range that people can afford, I use lots of shortcuts, and spend less time thinking about a project, just diving in until it's done. This strap took about 4-5 hrs, and some $15-20 material. So instead of a $200-$300 strap, it comes down around $100-$125. It looks pretty good, and the construction is solid, but the work is not like the saddlemakers or others here on the forum. I'm more like the local cobbler pumping out repairs and such, than the fine artists that show here.

What tool did you use for the matting around the letters? a-888, my favorite

Also, was that saddle tan antique or highlighter or what? Saddle Tan mixed with neatsfoot, covered with hi-lite

I assume that was mahogany dye on the edge? yep

.

[Go2Tex]

I see no mistakes and that lettering is great. Thanx Go2Tex, the longer I look, the worse it looks...lol

There's something inside me that will not allow me to do things perfectly, even though I'm quite able to do better. It goes back to the pricing thread, I think. To keep my stuff in a price range that people can afford, I use lots of shortcuts, and spend less time thinking about a project, just diving in until it's done. This strap took about 4-5 hrs, and some $15-20 material. So instead of a $200-$300 strap, it comes down around $100-$125. It looks pretty good, and the construction is solid, but the work is not like the saddlemakers or others here on the forum. I'm more like the local cobbler pumping out repairs and such, than the fine artists that show here.

What tool did you use for the matting around the letters? a-888, my favorite

Also, was that saddle tan antique or highlighter or what? Saddle Tan mixed with neatsfoot, covered with hi-lite

I assume that was mahogany dye on the edge? yep

.

Sorry to sound like I'm beating a dead horse but, there are so many different products out there for dye I have to ask, was that Fiebings pro oil saddle tan? I really want to try your technique, so I want to get this right. thanks

[rdb]

sorry, I didn't understand. yep feibings oil dye. It's the only kind i use. Stir the neatsfoot and oil dye constantly, it mixes well, but settles out quick. I've learned to make a lot of "happy accidents", out of dyeing with unintended results, so enjoy the experimentation...lol

[Go2Tex]

sorry, I didn't understand. yep feibings oil dye. It's the only kind i use. Stir the neatsfoot and oil dye constantly, it mixes well, but settles out quick. I've learned to make a lot of "happy accidents", out of dyeing with unintended results, so enjoy the experimentation...lol

Great, thanks! I will.

[Hennessy]

Thanx abn. That pattern is the easiest BW, to me. It's just a matter of matching legs, and hitting the center point. There's very little lining up to do, like a regular BW. The hardest part is getting the correct angle so the edge line leg will be blended by the border tool, just takes a few seconds of experiment on an equal sized scrap piece. This is the second time that I've heard people having a bit of trouble getting this one down, next time I do one, I'll take some pictures of the process.

rdb nice work tis good to see th heart pattern,back in australia in 69 i weld'd two basket stamps together n made several thousand belts for a belt co that finished them out n marketed.its a well liked pattern the world over eh keep up th good toolin adios pete