Jump to content

Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

  • Members
Posted (edited)

Thank you so much! You are a life saver! You just earned yourself a stirrup plate at no charge! I can see part number 58735 is home-made in mine. Do you have a part number for the foot you would like made so make sure we are on the right page with that? I will be studying your pics for a while. Thanks again!

Edited by ryano
  • Members
Posted

Well I think a may know a little more on whats going on with this machine now buy studying your pictures. It will take me a bit to get the machine up and going again. I'm working in the dark with no light, so to speak. I have no prints, nothing to refer to as far as measurements. I now see 3 parts that have been replaced with parts that may have been made in a "local" machine shop. Hat's off to whomever made these parts(I think). A few things I that I see are wrong are that non of the corners have been chamfered causing binding in the corners because of lack of clearances. I will not let this machine beat me!

  • Members
Posted

Well thanks again for all your help. I got it up and going finally. I had every nut, pin and bolt out of it. I am now a 97-10 expert! lol I just need to adjust the tension a little.

  • Members
Posted

ryano; My computer has been down for a few days so I have not been able to keep up on your progess. Sounds like you are getting a handle on the old stitcher. If I can be of any more help just holler. Let me know of your progress on the additional plates and feet. Mike

  • Members
Posted

Thanks guys! It was a sweet challenge! I have rebuild a lot of machinery from robots, lathes, to CNC mills and the sewing machines are the most challenging. Well Mr. Peterson I would like to know the part number of the foot you would like. They are listed in the 97-10 parts manual. I am assuming a left and right foot. Once I have that I will get started on it for you.

  • Members
Posted

Oh by the way, I am going to run Landis I needles in my machine. They are a little long, but they will work fine with a little modification. I just do not want to step down to a 794 needle.

  • Members
Posted

It stitches very nicely. Here's a pic of it sewing 2 12oz pieces together with 277 top and bottom thread.

97sewing.jpeg

post-8022-1237732505_thumb.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...