Moderator Wizcrafts Posted January 2, 2016 Moderator Report Posted January 2, 2016 (edited) Do you guys have any info on if there is a roller foot available for the consew 206 rb? The original foot I have leaves indents on my leather... Ive been looking for a roller foot searching under COnsew and Juki 562-3 and havent been able to find anything! WHat other foot options is there that wont mark leather, especially veg tan? Will be sewing up to 6 maybe 7 oz Thanks! No, there are no roller feet made specifically for walking foot machines. They are designed to work on straight stitch machines with just one fixed position presser bar. That's not to say you can't alter one to fit your machine's rear presser bar (or possibly replace the bar with one that accepts straight stitch feet), then remove the inside alternating foot. In effect, you will have to convert the machine into a needle feed straight stitch machine (no alternating feet). Edited January 2, 2016 by Wizcrafts Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Techsew 2700, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members kgeo Posted January 26, 2016 Members Report Posted January 26, 2016 I use bonded nylon or polyester depending on uv exposure up to a 138 with on problem. Polyester for outside and webbing. Groz Beckett and organ titanium needles. Changed the original motor to a consew cs1000 servo with 2" pulley and the old gal will see step stitches in leather or Cadillac along on upholstery all day long. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.