jwwright Report post Posted June 8, 2009 Been a while since I posted anything, and looks like things have been a little slow around here. So.....this is a saddle that I finished up about 6 weeks ago. Built it for myself, and it had a ride or two on it before I took photos. Modified Association with a wood post horn. The tree was made by Jon Watsabaugh. Thanks, JW Quote Share this post Link to post Share on other sites
hidepounder Report post Posted June 8, 2009 Nice job JW! Looks like a great workiing rig. Will you ride it down the fence? Bob Quote Share this post Link to post Share on other sites
buckskin1 Report post Posted June 8, 2009 very nice Quote Share this post Link to post Share on other sites
Steve Brewer Report post Posted June 8, 2009 Looks good JW,sometimes we just have to try them out. Steve Quote Share this post Link to post Share on other sites
jwwright Report post Posted June 9, 2009 Thanks folks. Bob.......in most ranch horse competitions, you have to box your cow, get one turn each way on the fence, then rope it ,stop it, turn and lead it off. For those kind of deals where I need to rope, yes I will ride it down the fence. However, since I am getting older and more wussified ( is that a word?) I find that I do tend to get hold of the horn more on the fence turns..........so, in AQHA or NRCHA cowhorse I will most likely opt for one of my ranch cutters with a horn that is more conducive to old cowpunchers grabbing hold! Thanks, JW Quote Share this post Link to post Share on other sites
KAW Report post Posted June 9, 2009 nice looking rig Quote Share this post Link to post Share on other sites
RichardCollmorgen Report post Posted June 9, 2009 Very nice and clean. Quote Share this post Link to post Share on other sites
jwwright Report post Posted June 9, 2009 thanks guys. JW Quote Share this post Link to post Share on other sites
bran7347 Report post Posted June 9, 2009 Thats a good looking rig. Quote Share this post Link to post Share on other sites
Steve Brewer Report post Posted June 13, 2009 JW,What are the specs on the tree? Quote Share this post Link to post Share on other sites
jwwright Report post Posted June 14, 2009 Steve...........gullet is 6 3/4" wide by 7 1/2" tall. 4 1/2" handhole width. 93 degree NW bars. Cantle is round 12" wide by 3 1/2" tall. Horn is 2 3/4" tall by 3" guad cap. JW Quote Share this post Link to post Share on other sites
BuckhornBrand Report post Posted June 16, 2009 JW- Great looking saddle, (as always). I was wondering how do you like the crossover rope strap on the modified association swells. I've often thought about it but hadn't seen it done before. Any special considerations when attaching it that would be different than with a slick fork? Hope you made it through the bad weather tonight. Thanks, Chuck Norris Quote Share this post Link to post Share on other sites
