Members David Fields Posted August 8, 2009 Members Report Posted August 8, 2009 Is there a trick to using the rope tool so the impressions all line up perfectly? I've tried using a line as a guide like you do with the basketweave tool but that doesn't work with the rope tool because the tool doesn't have a flat edge. HELP...are there any rope tool pros out there? Thanks! Quote
hidepounder Posted August 8, 2009 Report Posted August 8, 2009 You can do it by making a line, David. It's just a tool you need to practice with. You have to establish the angle that you like and the amount of overlap you like and practice maintaining that same angle. If you establish two lines...one on each side of the tool...that will help you maintain the same angle and overlap. Hope this makes sense..... Bob Quote
Members RichardCollmorgen Posted August 10, 2009 Members Report Posted August 10, 2009 Bruce explained how to use the rope tool in an earlier thread. He gave a great explanation. Quote
Members resqman Posted August 10, 2009 Members Report Posted August 10, 2009 Here are links to several already existing posts regarding Rope Stamping http://leatherworker.net/forum/index.php?showtopic=16142 http://leatherworker.net/forum/index.php?showtopic=3935 http://leatherworker.net/forum/index.php?showtopic=8875 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.