HELP finish cracking

[dscott]

went to tandy leather Sat. taking class i was doing my first dye job on the guitar straps i am doing first real leather project.

got them dyed they looked great so happy

they were out of super shene spray which was the finish i was going to use so i got Fiebings Leather Sheen big mistake

i finished them and when i went to put the adjustment piece throught the end the finish cracked and looked real waxy.

is there anything i can do to save them i only did 2 of them

thanks for all help

David

[Frank]

went to tandy leather Sat. taking class i was doing my first dye job on the guitar straps i am doing first real leather project.

got them dyed they looked great so happy

they were out of super shene spray which was the finish i was going to use so i got Fiebings Leather Sheen big mistake

i finished them and when i went to put the adjustment piece throught the end the finish cracked and looked real waxy.

is there anything i can do to save them i only did 2 of them

thanks for all help

David

David,

You might want to get a jar of the deglazer and it should take the leather sheen off the project but be careful as this stuff will eat right through nitrile gloves and should be used in a WELL Vetillated area! Either you put too heavy of a coat of the leather sheen on or you bought the new inferior leather sheen. There have been a lot of problems with flaking and cracking in the new leather sheen. Fiebings has offered to replace any of the new leather sheen that people have purchased. I guess there is a chemical reaction between the new formula and the propellent they use in the can. I hope this helps out a bit.

Frank

[dscott]

Thanks for your help

yes it is the new leather sheen

again

Thanks