pete Report post Posted November 23, 2009 (edited) First off I did this really quickly. All of the lines and stamps are extra heavy so that you can see them. The first picture shows a project with a base and centerline. Place the bw stamp on the line with HALF ON EACH SIDE! 1-Stamp a faint stamp or just mark where the bottom right leg "A" touches the baseline. 2-rotate the stamp so that the bottom right (leg "A") is still on the mark and the bottom left "B" is touching the vertical line. this is the proper angle. Go up the right side matching the legs and touching the centerline. Do the opposite on the left side, Hope this was clear pete I give up trying to post the 2nd and third pictures! I am not real literate in this stuff- sorry folks, but I think that you will get the message. Edited November 23, 2009 by pete Quote Share this post Link to post Share on other sites
