yldbill Report post Posted December 15, 2009 I want to try and make a solo seat for my 08 Wide Glide. I've been trying to get as much information as possible . I would like to know where it is possible to get seat pans. Any source will help. Quote Share this post Link to post Share on other sites
dirtclod Report post Posted December 15, 2009 Here's a bunch of places to get pans and kits. http://www.google.com/search?q=motorcycle+seat+pan+kit&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a Quote Share this post Link to post Share on other sites
Uncle Fester Report post Posted December 15, 2009 Try this guy, A lot of guys on the Hardknock forum deal with him. http://cgi.ebay.com/ebaymotors/Custom-seat-pan-Chopper-WCC-solo-harley-knucklehead-NC_W0QQitemZ350290929949QQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item518ef7691d Quote Share this post Link to post Share on other sites
bigorange Report post Posted December 16, 2009 well the last bike I built had a battery issue, that being the battery was housed in the interior of the oil tank and stood proud of the frame by near an inch. I could not lower the oil tank as it sat almost right upon the starter so here is what worked for me, I took regular card board, covered the areas I needed to mold then applied foil tape , the kind used in home insulation. I waxed the areas I covered with the foil tape and began to built a fiberglass seatpan on top of it, it worked very very well, and cost me next to nothing, it fit the bike like a glove, as it was cast directly on the bike and the problem area. I wrote an article on it and if you would like I can send it to you all the best Bo Quote Share this post Link to post Share on other sites
yldbill Report post Posted December 17, 2009 Thanks for all the info. If I decide to take on this project I'll try to get some pictures. Quote Share this post Link to post Share on other sites
