leatherman1457 Posted January 3, 2010 Report Posted January 3, 2010 I needed a tool box that was nice enough to hold my Gomph Tools. Nice tools, so you have to have a nice box to put them in. The box is covered 100% with leather. The out side has a nice 2/3 oz leather dyed to a light brown. I put a red diamond tuck leather on the from and placed a scalloped punched leather over the red diamond tuck and placed solid brass tacks in each of the tooled scallops . The inside is covered bottom and sides with the same red diamond tuck . with a brass nail in each point of the diamond. I made the tool shelves out of walnut and drilled them 3/4" and sanded and sealed the wood and set two shelves in the box to holds two sets of gomph creasers. This is a very nice box that is still not quite finished. I still need to make the letters for my name to go one the red diamond tuck and I need to make a concho that I will put on top of the box with a silver concho in the middle of the leather concho. This is a fun box to make and i need to make a couple more to hold the rest of my Gomph tools. Hope you enjoy the pictures . Gary Quote
Members Deno Posted January 3, 2010 Members Report Posted January 3, 2010 Sweet. I like it, good job. My best to you. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.