Superman Conchos

[wulfe67]

I am in need of some Superman logo conchos for a special personalized order. Does anyone know where I can find them or something that I can use in place of a concho.

Any help would be greatly appreciated!!!

Thanks

[jakeamon1]

I am in need of some Superman logo conchos for a special personalized order. Does anyone know where I can find them or something that I can use in place of a concho.

Any help would be greatly appreciated!!!

Thanks

I've made some conchos by using JB Weld, a pendant, and a rapid rivet. I taken metal pendants that are painted and roughed up the backside with a dremel tool so the weld would adhere well. Same with the rivet. Need to use JB with a painted pendant because the heat from soldering will melt the paint. You may be able to find a superman pendant that would work. Good luck.

[wulfe67]

I've made some conchos by using JB Weld, a pendant, and a rapid rivet. I taken metal pendants that are painted and roughed up the backside with a dremel tool so the weld would adhere well. Same with the rivet. Need to use JB with a painted pendant because the heat from soldering will melt the paint. You may be able to find a superman pendant that would work. Good luck.

Thank you for the tip. I have found some "Lapel Pins" that I will try for now but if that doesn't work I will definitely be on the look out for some pendants

[savvydreambuilder]

Another option would be to find a logo that you like and is suitable to be a concho and have it laser cut out of stainless or brass and then braise on chicago screw, or if for a saddle then braise on a saddle screw.

If it is too flat, then the laser cut is easily pressed into a dome shape with a fairly simple die.

Nicole

Edited March 9, 2010 by savvydreambuilder