Members Old Navy Posted February 10, 2010 Members Report Posted February 10, 2010 Hi,my machine is up and running fine.The foot pedal on the floor is highly unstable.What do you do to make it more stable?Its one of those plastic things.Thanks,navy Quote
dirtclod Posted February 10, 2010 Report Posted February 10, 2010 Are you talking about the pedal that have a little button on the top ? If you are and want something bigger to put your foot on you could make a box with a hole in it for the pedal to set in with just the button sticking out. You could build that on a angle or flat. If your taking about something else a picture would help. Quote
Members Old Navy Posted February 10, 2010 Author Members Report Posted February 10, 2010 Are you talking about the pedal that have a little button on the top ? If you are and want something bigger to put your foot on you could make a box with a hole in it for the pedal to set in with just the button sticking out. You could build that on a angle or flat. If your taking about something else a picture would help. Here is a picture. Quote
dirtclod Posted February 10, 2010 Report Posted February 10, 2010 (edited) Just guessing again cause you haven't said what the problem is to little and wollbie i guess. I would build a box around the pedal the same shape, and the size you want for your foot or feet to set on. Plus i would glue some of the stuff you put in your cabinets to keep dishes from sliding around on the bottom. I'm not sure what it's called but ya can get it wal mart and i'm sure lots of other places. I put it under my cutting board to keep it from sliding around. Edited February 10, 2010 by dirtclod Quote
Contributing Member UKRay Posted February 10, 2010 Contributing Member Report Posted February 10, 2010 Had you thought of screwing the base of the pedal onto a larger (possibly weighted) base board? That ought to sort you out. The tops come off those things quite easily - you may need to drill three or four holes through the base and use some washers to stop it cracking when you screw it down tight, but I would imagine the job is relatively quick and easy. Ray Quote
Moderator Wizcrafts Posted February 11, 2010 Moderator Report Posted February 11, 2010 That foot controller is for a home sewing machine motor, not an industrial motor. That's what threw us for a loop. When we think of a foot pedal we are thinking about a large mechanical pedal that pivots on a steel floor bar - on a steel k-legs frame, that has linkage going up to an arm hanging down from a servo or clutch motor, mounted under a 48" x 20" x 1.75" sewing table. Quote
Members Old Navy Posted February 11, 2010 Author Members Report Posted February 11, 2010 That foot controller is for a home sewing machine motor, not an industrial motor. That's what threw us for a loop. When we think of a foot pedal we are thinking about a large mechanical pedal that pivots on a steel floor bar - on a steel k-legs frame, that has linkage going up to an arm hanging down from a servo or clutch motor, mounted under a 48" x 20" x 1.75" sewing table. [/quot Ok guys,sorry about the mixup.My pedal is for a 206 R CONSEW.Ill give more information next time.You have given me some good ideas.Thanks,navy Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.