BillinOK Report post Posted March 8, 2010 After spending 1/2 hour trying to figure out why the aerostitch would not tension right, I got it going. Haven't used it in a while and I didn't notice the thread had slipped on one of the tension wheels. I did this one a little different: Done all stamping after casing. The badge is not too visible. I had Jeff at Gray Ghost Graphics make this. It takes about 3 tons of pressure to get it this way. I then put a coat of neats foot oil on and let it dry, then dyed with medium brown. Done the stitching, and yes I need to practice more, then a coat of Aussie for the final coat and buffed. I was pleased with the color and so was the customer. Quote Share this post Link to post Share on other sites
terrahyd Report post Posted March 8, 2010 Nice work Bill, looks like you have the stitching down now,,good job Bill ..... ...Doc.. Quote Share this post Link to post Share on other sites
