Gerber Sheath And Glass Case

[MADMAX22]

Well havnt posted in a bit, been busy and had leatherworking on hold for a while.

Here are my couple of projects that I just finished up. The gerber sheath is Dk brown in and out. Its gonna be part of a set with this, flash light case, and tape measure case.

The glasses case is gonna be included with a case for a couple deck of cards once I get that ball rolling. Its saddle tan. The inside is lined with pigskin.

Both projects are HO and after dyed are oilded, coated with a light coat of neatlac and tonight will get a thin coat of sno-seal.

Also would like to thank Ed the bearman for his glasses case pattern he posted a while back.

Edited March 14, 2010 by MADMAX22

[Storm]

I like both of these Max. I am going to have to get around to making one for my Leatherman Multi-Tool too! Nice and clean work.

[MADMAX22]

Thanks Storm.

I think with my next set after I finish these I'm gonna try the single layer of leather with the belt loop cut into it via two slits. I think it may be pretty strong and should save some time. Putting the belt loops on these seems to take up most of the time lol.

[MADMAX22]

This is the light sheath to go with the gerber sheath. I didnt get around to finishing the tape measure sheath, Ill get to that later.

HO, little thicker leather about 7/8oz, DK brown but took the dye a little darker then the other one.

One thing I messed up on thats obvious is the tack holes from the wet forming process, I missed the would be stitch line. By the time I got to that point though I went ahead and finished it anyways. This is a favor for a buddy at work other wise normally I would redo something like that.

[MADMAX22]

Well finally got around to doing the tape measure sheath. Tried a little different style with the belt loop this time. Wanted to see how this works out.

Not the best workman ship I have done but it turned out ok.

[Timd]

They all look great! That Gerber is a real handy tool, I carry one every (working) day.

[EngineCo1]

Great looking projects Sir. Might look into making a tape measure holder now. LoL