Steel And Leather

[RSFknives]

here is a pair of knives which i might have shown before,

but now i´ve gotten the sheaths nearly finished... just the final moulding and colouring of them to go..

first there is a recurve in A2

it is 270 x 40 x 6,5mm and a blade 142mm

skales are of black paper mikarta and the blade has a coat of matt grey duracoat.

next is a little one in Damasteel

it is 167 x 31 x 2,5mm with a blade 83mm

scales are mammoth

here is what the sheaths ended upp like

/Roger

/Roger

[MADMAX22]

Great looking sheaths and knives.

Does that duracoat hold up half way decent, it does give a cool look to that knife IMO.

[RSFknives]

well when i was in the service the gun i had there was duracoated and it held upp well.

so i´m hoping it´ll do the same on this knife...a few i´ve talked to that have tried it are happy with it..

/Roger

Great looking sheaths and knives.

Does that duracoat hold up half way decent, it does give a cool look to that knife IMO.