Members RSFknives Posted April 25, 2010 Members Report Posted April 25, 2010 here is a pair of knives which i might have shown before, but now i´ve gotten the sheaths nearly finished... just the final moulding and colouring of them to go.. first there is a recurve in A2 it is 270 x 40 x 6,5mm and a blade 142mm skales are of black paper mikarta and the blade has a coat of matt grey duracoat. next is a little one in Damasteel it is 167 x 31 x 2,5mm with a blade 83mm scales are mammoth here is what the sheaths ended upp like /Roger /Roger Quote life is to short to own un ugly gun or knife!
MADMAX22 Posted April 25, 2010 Report Posted April 25, 2010 Great looking sheaths and knives. Does that duracoat hold up half way decent, it does give a cool look to that knife IMO. Quote
Members RSFknives Posted April 26, 2010 Author Members Report Posted April 26, 2010 well when i was in the service the gun i had there was duracoated and it held upp well. so i´m hoping it´ll do the same on this knife...a few i´ve talked to that have tried it are happy with it.. /Roger Great looking sheaths and knives. Does that duracoat hold up half way decent, it does give a cool look to that knife IMO. Quote life is to short to own un ugly gun or knife!
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.