Members gesmith40 Posted June 17, 2010 Members Report Posted June 17, 2010 I have been using the Ecoflo Super Sheen as a finish for my projects since NeatLac is no longer available. Seems to work OK, but have been looking for something I can be sure will hold up for wear and tear. I got some Clearlac to try as this is supposed to be the same as Neatlac. Problem is when I apply, seems to thicken up before I can get single coat into belt. Maybe I am too used to Ecoflo being so thin since it is water based. I am just using old Tshirt to apply Clearlac with and not trying to go heavy at all. I talked to Kevin at Springfield who suggested trying the Clearlac thinner to cut it with. Was wondering if anybody had any experience with this as well? Also, if you used the thinner, what ratio? Thanks for your info and suggestions. Quote
Members iwannabeacowboy Posted June 17, 2010 Members Report Posted June 17, 2010 Don't know about your thinning guestion but Neat-Lac can still be had. By the quart or spray can at http://stleather.com/2008-P35.html charlie Quote
Members kevinhopkins Posted June 18, 2010 Members Report Posted June 18, 2010 Hi... When Leather Factory discontinued Neat lac, I went to the manufacturer and bought it. They sold it under the name "Clear Lac", and packaged it for Tandy under the name Neat lac. Anyway, we've got it if you still need it. Kevin Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.