pistol packin mama Report post Posted September 1, 2010 Hi all out there! I have recently acquired a Singer 34K11 machine. What a beauty! I am in need of an instruction and service manual. Singer can't help! Anyone out there have one? Quote Share this post Link to post Share on other sites
albane Report post Posted September 1, 2010 http://www.singerdealers.com/IPpartCharts/34K1_5_11.pdf Quote Share this post Link to post Share on other sites
pistol packin mama Report post Posted September 1, 2010 http://www.singerdea...s/34K1_5_11.pdf I have the parts list. Need instructions for servicing and using attachments. Thanks for the reply. Quote Share this post Link to post Share on other sites
albane Report post Posted September 2, 2010 It's likely that Singer never produced the manuel you seek . Quote Share this post Link to post Share on other sites
dirtclod Report post Posted September 2, 2010 I may have a manual i'm not but i will look tomorrow. If i have one it's not for the same machine but it is a post Singer post machine. Quote Share this post Link to post Share on other sites
pistol packin mama Report post Posted September 2, 2010 I may have a manual i'm not but i will look tomorrow. If i have one it's not for the same machine but it is a post Singer post machine. If it is close, it may work. Having trouble theading the bobbin. It is also equipped with a 2 speed pulley but the motor only supports one at a time. I want to make sure that I get to all the grease fiitings and oil spots. Quote Share this post Link to post Share on other sites
dirtclod Report post Posted September 2, 2010 (edited) I just looked and i don't have a manual. My machine is a 51 w 56 and i did find a place to get a manual for it http://www.proleptic...show=100&page=3 . On mine i just put some oil in all of the holes. The bobbin should have a slit and a little clip on it that the thread goes behind if that makes any sense. You may be able to run it with either pulley. But i think you will need a different length belt longer or shorter depending on which one it's on now. Maybe somebody that knows alot more than me will stop by and help. Edited September 2, 2010 by dirtclod Quote Share this post Link to post Share on other sites
pistol packin mama Report post Posted September 2, 2010 I just looked and i don't have a manual. My machine is a 51 w 56 and i did find a place to get a manual for it http://www.proleptic...show=100&page=3 . On mine i just put some oil in all of the holes. The bobbin should have a slit and a little clip on it that the thread goes behind if that makes any sense. You may be able to run it with either pulley. But i think you will need a different length belt longer or shorter depending on which one it's on now. Maybe somebody that knows alot more than me will stop by and help. Thanks for the info and I will try the site. Quote Share this post Link to post Share on other sites
