vragenvuur Report post Posted September 13, 2010 I am looking for: a manual Adler 105-64 FREE ARM/Cylinder arm, heavy duty sewing machine, written in englisch, german or dutch. Can somebody tell me also about needles 328 CF (what kind of needle-point and what kind of materials and thickness?) . Is it possible to sew leather with these needles? Quote Share this post Link to post Share on other sites
Trox Report post Posted September 23, 2010 I am looking for: a manual Adler 105-64 FREE ARM/Cylinder arm, heavy duty sewing machine, written in englisch, german or dutch. Can somebody tell me also about needles 328 CF (what kind of needle-point and what kind of materials and thickness?) . Is it possible to sew leather with these needles? Hi! I got a short manual from a German Adler dealer who applies for the Adler class 105/104 with sub classes and a part list. Give me your email and I will send it to you (remember the mail format on an open forum format xxx att xxx dot xxx) I have never seen the 328 CF needles before, what make is it? The needle system 328 is for your machine and the standard needle for timing your machine is 328 LR size 200 (200 is metric = 2 millimeter, it has a left cutting point) But you can of course use any 328 needle on that machine. The thread size decides the needle size. Use new needle on your machine to avoid problems! If you want the manual just let me know! Trox Quote Share this post Link to post Share on other sites
Trox Report post Posted September 23, 2010 Send me a PM! Trox I am looking for: a manual Adler 105-64 FREE ARM/Cylinder arm, heavy duty sewing machine, written in englisch, german or dutch. Can somebody tell me also about needles 328 CF (what kind of needle-point and what kind of materials and thickness?) . Is it possible to sew leather with these needles? Quote Share this post Link to post Share on other sites
Jimbob Report post Posted September 30, 2010 Hi! I got a short manual from a German Adler dealer who applies for the Adler class 105/104 with sub classes and a part list. Give me your email and I will send it to you (remember the mail format on an open forum format xxx att xxx dot xxx) I have never seen the 328 CF needles before, what make is it? The needle system 328 is for your machine and the standard needle for timing your machine is 328 LR size 200 (200 is metric = 2 millimeter, it has a left cutting point) But you can of course use any 328 needle on that machine. The thread size decides the needle size. Use new needle on your machine to avoid problems! If you want the manual just let me know! Trox Trox.... would you mind sending me a copy also....I have a Adler 105-64 and like to have a German (my native language ) manual...!? Please e-mail to: berkheim1 at embarqmail dot com Thank you so much!!! James Quote Share this post Link to post Share on other sites
Trox Report post Posted October 5, 2010 Hello James! I just saw your request and will send what I have on that machine. It Is just a short manual , and a partlist I got from Sieck Iternational Germany. Trox Trox.... would you mind sending me a copy also....I have a Adler 105-64 and like to have a German (my native language ) manual...!? Please e-mail to: berkheim1 at embarqmail dot com Thank you so much!!! James Quote Share this post Link to post Share on other sites
jsinger Report post Posted December 7, 2011 I have an English manual for the Adler 105-64, 38 pages. The front page states that "this manual is intended to provide rapid information to the sewing machine mechanic and to assist in the carrying out of adjustments and repairs to the machine. It is assumed that the mechanics will have a basic knowledge of dismantling and assembly of the machine. This booklet contains a brief summary of the main functions and necessary adjustments as well as hints ono othe elimination of faults." It has four sections, Techanical Info, Functions, Adjustments and Trouble-shooting. I purchased it on ebay for $20 Plus $5 shipping. I'll make you the same deal and set up a Buy Me Now Auction if you're interested. I looked high and low for the manual and finally found a seller with a machine that agreed to make me a copy. I just recently purchased my Adler and the owner didn't have one. Let me know if you are interested. I may go ahead and set up an auction as I know there are others out there looking for the same thing. Quote Share this post Link to post Share on other sites
Jimbob Report post Posted December 7, 2011 I have an English manual for the Adler 105-64, 38 pages. The front page states that "this manual is intended to provide rapid information to the sewing machine mechanic and to assist in the carrying out of adjustments and repairs to the machine. It is assumed that the mechanics will have a basic knowledge of dismantling and assembly of the machine. This booklet contains a brief summary of the main functions and necessary adjustments as well as hints ono othe elimination of faults." It has four sections, Techanical Info, Functions, Adjustments and Trouble-shooting. I purchased it on ebay for $20 Plus $5 shipping. I'll make you the same deal and set up a Buy Me Now Auction if you're interested. I looked high and low for the manual and finally found a seller with a machine that agreed to make me a copy. I just recently purchased my Adler and the owner didn't have one. Let me know if you are interested. I may go ahead and set up an auction as I know there are others out there looking for the same thing. I also have now a english Adler service manual and partslist For the Adler 105-64.... But I give mine away for free!!! PDF file....ping me if ya all need o e...and yes it is for free!! James Quote Share this post Link to post Share on other sites
jsinger Report post Posted December 8, 2011 Too bad I didn't find you before I paid for mine! I also have now a english Adler service manual and partslist For the Adler 105-64.... But I give mine away for free!!! PDF file....ping me if ya all need o e...and yes it is for free!! James Quote Share this post Link to post Share on other sites
Trox Report post Posted December 9, 2011 Hi Adler fans, Dürkopp Adler has started a blog where you will find manuals and sparepart lists for all 105 sub classes including 105-64. And a lot more stuff on old Adlers. "The world of Dürkopp Adler spare parts" http://sew24.blogspot.com/p/downloads.html Here is the good stuff free. Hi James, read up. Let the downloads finish, they are very slow. Trox Quote Share this post Link to post Share on other sites
Jimbob Report post Posted December 9, 2011 Hi Adler fans, Dürkopp Adler has started a blog where you will find manuals and sparepart lists for all 105 sub classes including 105-64. And a lot more stuff on old Adlers. "The world of Dürkopp Adler spare parts" http://sew24.blogspot.com/p/downloads.html Here is the good stuff free. Hi James, read up. Let the downloads finish, they are very slow. Trox Yes Trox, very slow.....these guys from Adler are right on top of it....they send me a seperate PDF file.....very nice!! As Trox said, lots of good info and good downloads too!! Go check it out.....maybe we all can quit paying for cheap Unreadable copies.... Aloha Jimbob Quote Share this post Link to post Share on other sites
Trox Report post Posted December 9, 2011 Everybody says Original Adler parts are too expensive, I do not think so. I just bought a new complete shuttle for my Adler 105 from Dürkopp Adler Norway. The price was the same as for an aftermarket shuttle from Hirose on EBay. 189$ here in Norway (one of the most expensive country in the world) this was a part stamped Dürkopp Adler. And thanks to the new blog I found the right shuttle for my obsolete Adler class 5-27, Dürkopp Adler still have shuttles for the old class 5 and class 4. You just need the right part number and I have those numbers. I am about to start a new topic about DA spare parts and part numbers for the old classes 105, 104 , 5 and 4 with all subclasses. I will inform you about missing part numbers and changes on machines that I know of there. Trox Yes Trox, very slow.....these guys from Adler are right on top of it....they send me a seperate PDF file.....very nice!! As Trox said, lots of good info and good downloads too!! Go check it out.....maybe we all can quit paying for cheap Unreadable copies.... Aloha Jimbob Quote Share this post Link to post Share on other sites
stormys leather Report post Posted July 6, 2015 I have an English manual for the Adler 105-64, 38 pages. The front page states that "this manual is intended to provide rapid information to the sewing machine mechanic and to assist in the carrying out of adjustments and repairs to the machine. It is assumed that the mechanics will have a basic knowledge of dismantling and assembly of the machine. This booklet contains a brief summary of the main functions and necessary adjustments as well as hints ono othe elimination of faults." It has four sections, Techanical Info, Functions, Adjustments and Trouble-shooting. I purchased it on ebay for $20 Plus $5 shipping. I'll make you the same deal and set up a Buy Me Now Auction if you're interested. I looked high and low for the manual and finally found a seller with a machine that agreed to make me a copy. I just recently purchased my Adler and the owner didn't have one. Let me know if you are interested. I may go ahead and set up an auction as I know there are others out there looking for the same thing. Quote Share this post Link to post Share on other sites
stormys leather Report post Posted July 7, 2015 I also have now a english Adler service manual and partslist For the Adler 105-64.... But I give mine away for free!!! PDF file....ping me if ya all need o e...and yes it is for free!! James Do you still have that manual? I just received a alder 105-64 and need help setting it up. Thank you. My email address is jess75cc@yahoo.com if you could email it to me Thanks Quote Share this post Link to post Share on other sites
Constabulary Report post Posted July 7, 2015 I hope this helps: http://sew24.blogspot.de/2011/10/manual-for-adler-class-104-and-105.html Quote Share this post Link to post Share on other sites
Wizcrafts Report post Posted July 7, 2015 Do you still have that manual? I just received a alder 105-64 and need help setting it up. Thank you. My email address is jess75cc@yahoo.com if you could email it to me Thanks You just handed your email address to every spammer and forum harvester bot in the World. Matters like this should be handled via the forum's private messages system. Only logged in members can access data posted in them. Anybody can see text posted in topic pages. Quote Share this post Link to post Share on other sites
